Featured
Reset Chevy Equinox Oil Light
Reset Chevy Equinox Oil Light. Display the “oil life remaining” message in the driver information center. When on that screen, hold down the center check button until the oil life resets to 100 percent.

How do i reset the engine oil change light on. Turn the ignition to on/run with the engine off. First give the vehicle power but do not start.
If You Liked This Video And Found It Helpful Feel Free To Like, Share,.
Use the buttons to go to the “vehicle” menu. Immediately after step 1 press and release the gas pedal 3 times within 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
When On That Screen, Hold Down The Center Check Button Until The Oil Life Resets To 100 Percent.
Quick how to video on resetting the oil life indicator on a 2020 chevy equinox. Turn the ignition to on/run with the engine off. This will also for chevrolet models in 2018, 2019, 2020 and 2021.1.
First Give The Vehicle Power But Do Not Start.
The procedure for resetting the oil life monitor on a chevy equinox: Turn the ignition off and then start the engine to verify the indicator has been reset. The oil light also called “maint.
Use Up Or Down Arrow To Select Yes To Reset.
In case the brake fluid level is low, topping it off should turn off the abs warning light in equinox. Confirm reset by pressing set/clr button. Use up or down arrow to select yes to reset.
But It Is Important To Further Investigate The Reason For Low Brake Fluid Level.
Press and hold the set/reset. Press and hold on the steering wheel until the oil maintenance system resets to 100%. How to reset the oil life on a chevy equinox?
Comments
Post a Comment